09 fox racing shox owner's manual

Grips, intense Dual Density Lock-On.
Maxxis High Roller II,.5x2.4, EXO.Refer to the Air Spring Setting Guidelines nissan x trail 2003 owners manual pdf table below for the proper sag setting.ProPedal, service Intervals, important Safety Information, stuck Down Shock.Continue if the sag is not to specification.If you close your window or tab, you must re-access the site through the X Plan Pricing website to ensure that all eligible plan pricing is visible.Also, some dealers may choose not to participate in X Plan pricing.The three ProPedal knob settings are: (1) propedal Light (2) propedal Medium (3) propedal Firm To adjust the ProPedal knob: Turn the ProPedal lever to the propedal position, as shown in graphic above.Check that the front and rear brakes operate properly on flat land.
As with the ProPedal lever, switch positions and select a setting that reduces suspension movement most effectively while providing the desired amount of bump absorption.




Throughout this website and catalog the terms Jeep, Wrangler, mopar, Rubicon are used for identification purposes only.Crank, sRAM X1 1000, 32T, cassette.Carefully cycle the suspension through its entire travel.Sram X01, 11 speed, front Derailler, n/A.General Maintenance There may be a small amount of air sleeve lubricant residue on the body.Setting Sag You can also view a Flash video on Setting Sag.Stem, thomson Elite X4: 50 mm, headset.Push the ProPedal knob into its new position ( #4 ).Some other things to consider for all shock models: If you ride in extreme conditions, service your shock and air sleeve more frequently.Repeat steps 2-5 until proper sag is achieved, then replace the air valve cap.
Turning the ProPedal knob (animated clip eng056).
Switch between positions and select the one that reduces suspension movement most effectively while providing the desired amount of bump absorption.