That is the KEY question.
Just imagine taking this lampized 20 Euro player to your buddy who has Wadia 860X and when you wipe the floor with the Wadia.
This is a rough diamond.
The non mathematical explanation is possible if we take the example of say the printer.Like the Representation Army Squad which greets politicians and kings at the airports.This is key element of their sound signature.What is wrong with you that you do not like ps2 backup games full version iso 24 bit/192 KHz and hdcd and sacd and vlsi chips?Browse this list to find sony service documentation for your model.The result was a D/A system, internally referred to by Philips as "DAC3" (the two earlier systems were DAC1 and DAC2, of course which was introduced in the summer of 1989.This tube is somewhat similar to ECC83 but beats it in quality hands down.Rogic DAC is here One clever guy Thomas who tries to build a commercial DAC spent many years optimizing the TDA circuit and arrived at the dual differential balanced config with some gigantic decoupling caps - In my estimate may be close to.See it here cambridge CD3 This picture shows the DAC board of Marantz CD-94-2 which has two single crown chips in differential balanced mode (no balanced output is available prior to lampization).This is identical looking PCB of Marantz 94 MK1 - just like the Philips DAC above - both made at the same time in the same Marantz Japan factory. .The process of musical signal creation inside the DAC is explained on this drawing of the TDA1540 guts.SMD caps (the small ones) and the "proper" MKP or MKT capacitor that replaces them.Not to mention accuracy of head movement on the rails, temperature of injectors, air pressure and humidity etc.
Both outputs from leg one of opamp via PIO to RCA's.
I followed the instruction of dcaudio and the result was really fantastic.What a JOY TO look AT I guess it sounds superb on its own, even without tubes.There are some fantastic web sites which I discovered recently - dedicated.One box version of the almighty CD1.Everyone whom I subjected to test drive of 6N2P in their own gear commented that this can't be true.Much has been written about TDA1541A DAC all over the world, but I found it without prior opinion seeking - just by my ears.The data words are then fed to a 1-bit DAC, with the 16-bit error fed back in a noise-shaping loop.I have yet to find one for myself!Especially in NOS mode and with very good capacitors around.Similar to Philips DAC960 and Philips CD880, Which were made by Marantz Japan.They were thus faced with the problem of squeezing four times the resolution from their existing 14-bit DAC.